Parts

SRAM's X4 shifters feature Exact Actuation 1:1 cable pull ratios for precise, dependable rear shifting. They deliver proven ergonomics and excellent performance at a great price.

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

SRAM’s 11-speed chain features heavily chamfered outer plates for improved shifting and quiet running. And, with its great PowerLock connecting link, installation and removal is a snap.

SRAM's X3 Rear Derailleur is ready for adventure. Its composite and steel construction is tough, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.

SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation and removal is a snap.

Designed from a long line of dependable, lightweight chains that are built for toughness, the recommended chain for APEX 1, PC-1110. Designed with SRAM’s trusted XX1 geometry, the PC-1110 features solid pin construction, 11-speed PowerLock and smooth, efficient shifting that you can count on every time out. - Optimized to work with X-SYNC rings for precise and dependable 11-speed performance - Fully compatible with all SRAM 1x drivetrains - Closing Link: PowerLock - Outer Plate: Polished grey - Inner Plate: Polished grey - Pin Treatment: Chrome Hardened - Weight: 232 - 273 grams - Rivet Type: Solid Pin - Speeds: 11

SRAM's PC-870 Chain makes a trusty partner over hill and dale. It's easy to install, too, thanks to the no-tools-needed PowerLink. Quiet, smooth and reliable, the PC-870 will take you where you want to go.

The PC-951 is SRAM's most economical PowerChain and maintains their high standards of quality. It boasts tough chrome-hardened pins for durability and accurate shifting. And, with its great PowerLink, you don’t even need tools to install it.

SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

When it's time to replace your old 8-speed cassette, check out SRAM's PG-850. Its steel construction and SRAM's PowerGlide technology combine to deliver miles of solid shifting and outstanding durability.

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws

The high torque loads of E-MTBs require tough components. The straighter chain line EX1 offers allows the use of a chain that is wider and more robust than those found on drivetrains not specifically engineered for E-MTBs. The EX1 chain has been engineered to run quiet across the gear range and transmit more power to the rear wheel. - EX1 chain is wider and designed for the high-torque, heavy-duty use of E-MTB - Compatibility: 10-speed - Chain length: 144 links

SRAM’s 10-speed chain is compatible with all industry-standard 10-speed systems. And, with its great PowerLock connecting link, installation is a snap.

SRAM’s PC-971 Chain delivers light weight, strength and smoothness to your drivetrain. Its nickel-plated sideplates provide faster and more accurate shifting plus excellent reliability. And, with its great PowerLink, you don’t even need tools to install it.

SRAM's X5 shifters feature Exact Actuation 1:1 cable pull ratios for precise, dependable shifting. Crafted with lightweight aluminum, the X5s are built tough to handle all your off-road endeavors.

No mixed messaging or compromises here. The GX DH cassette was built with only one purpose in mind—exploiting gravity to its fullest lap after lap. This downhill-optimized 7-speed cassette provides gear steps that give each shift more purpose, and its compact design allows more spoke clearance. It’s a full-on, dedicated SRAM 1x cassette for gravity that lets you keep some money for a lift ticket. GX DH—Get Some. - The PG-720 cassette is an integral part of the SRAM 1x DH drivetrain system - This is the most affordable full-featured, dedicated 1x DH cassette in the industry - Fewer cogs allow for a faster transition from starting cog to highest cog - More rear wheel clearance around spokes - Fully compatible with the SRAM X01 DH drivetrain - Splined driver body compatible - Weight: 224 grams - Gear-Ratio:11 – 25T - Speeds: 7 - Recommended Group: GX DH

SRAM's NX trigger shifter with X-ACTUATION technology gives you sharp, dependable shifting. Built for precise and swift shifting across SRAM's wide range 11-speed cassette, the NX trigger shifter brings industry changing technology to everyone. - X-ACTUATION for precise and dependable 11-speed performance - Fully compatible with all SRAM 1x drivetrains - Weight: 142 grams - Speeds: 1 x 11 - Colors: Black

A tough bottom bracket that will go as hard as you. The PowerSpline has a heat-treated chromoly 12 spline spindle to make sure it can go the distance with even the most demanding riders. SPECIFICATIONS: - BB-FRAME INTERFACE: English/BSA 68E/73mm, English/BSA 68mm, English/BSA 73mm - CHAINLINE: 46.0mm, 48.5mm, 51.0mm, n/a - SPINDLE LENGTH: 108mm Spindle, 113mm Spindle, 118mm Spindle - SUPPORT E-TYPE FD: n/a, Yes - CRANK-BB INTERFACE: Power Spline - BEARING TYPE: n/a - SPINDLE DIAMETER: n/a - CUP MATERIAL: n/a - WEIGHT (G): 363 - WEIGHT BASED ON: BSA 73mm, 113mm spindle

SRAM's X4 Rear Derailleur provides precise, dependable shifting along with long-term durability. Its aluminum and steel construction delivers through the roughest trail, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.

SRAM's Apex Brake Caliper is forged from aluminum for low weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

Precise and easy to use, SRAM's Apex 1 flat bar shifter places a wide range of available gears right at your fingertip. - Exact Actuation technology for precise and dependable 11-speed performance - Weight: 142 grams - Speeds: 1 x 11 - Recommend Group: SRAM Apex 1 - Color: Black

With SRAM's X1 Chain, it's 1x11 all the time, so the chain can be narrower, stronger, faster — all because it doesn't have to deal with high-stress, front chainring shifting. Since it only has to do rear shifts, gear changes are telepathically fast and feathery light. Its "wide tooth, narrow tooth" pattern perfectly matches SRAM's X-Sync chainrings so dropped chains and cumbersome chainguides are a distant memory. The durability is impressive, too, with SRAM's Hard Chrome tech, solid pins and a proprietary link finish for improved life span.

When it's time to replace your 9-speed cassette, check out SRAM's PG-950 cassette. It delivers solid shifting and durability ride in and ride out for your 9-speed rig.

Clamp allows use of a braze-on derailleur on frames without the braze-on tab. Includes a tab to use SRAM's lightweight and easy-to-adjust chain control device. - Fits all SRAM road braze-on front derailleurs - ChainSpotter not included

SRAM's X4 shifters feature Exact Actuation 1:1 cable pull ratios for precise, dependable shifting. They deliver SRAM's proven ergonomics and excellent performance at a great price.

SRAM NX Grip Shift with X-ACTUATION™ technology gives you sharp, dependable shifting. Built for precise and swift shifting across our wide range 11-speed cassette, the NX Grip Shift brings industry changing technology to everyone. - SRAM 1x™ X-ACTUATION™ for precise and dependable 11-speed performance - SPEED METAL™ shift indexing - ROLLING THUNDER™ ball bearing technology - JAWS™ lock-on grip technology