Parts

Nexus Revoshift 3-speed shifter with optical gear display.

- Simple and reliable square taper bottom bracket - Replaces both BB-UN26 and BB-UN55 - Sealed cartridge bearings - Cr-Mo axle - For bicycles equipped with a chain case, select BB-UN300-K - For E-type front derailleur compatibility, choose BB-UN300-E - Fixing bolts not included; Shimano FC-E6000 bolts suggested

- Install this in line to your shift housing for precise tension adjustments - Compatible with all 4mm shift housing - Allows for 3.5mm of adjustability - Indexed movement prevents any accidental or unintentional adjustments - Compact design only adds 14mm to housing length

The Shimano Tourney TX800 front derailleur offers precise shifting with HYPERDRIVE technology for 3x7 and 3x8 speed drivetrains. - Action: Top Swing - Applicable Top-Mid tooth difference: 10T - Cable Route Type: Dual-Pull - Chain line: 47.5/50mm - Chainstay angle: 63-66° - Top gear teeth: 42T/48T - Total capacity: 20T

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager XXX Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2 Double Ended: No Length: 3000 mm Quantity Included: 1

Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments. - Follow laser-etched torque listing on collar

Jagwire's Cable Grips are adapters that make it possible to run hydraulic brake lines on bicycle frames that have housing stops that were designed for regular wire cables and standard housing sections. Once the regular cables and housing sections are removed, the Cable Grips are inserted and tightened in place in the standard frame stops. Then, the hydraulic lines are attached and securely held in place by the gripping jaw(s) of the Cable Grips. - Aluminum model accepts lines up to 5mm in diameter and the lines snap in. - Stainless model grips fully around the lines and is adjustable to fit most diameters.

- High performance compounds recommended for all-conditions - Steel backing

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

Genuine replacement parts Revive your ride with these BB90/95 bottom bracket bearings. Replacement V2 bearings for oversized bottom brackets. - V2 Bearing to be used in BB90 or BB95 shell when bottom bracket bearing bore is slightly oversized - Measurable Outer Diameter (OD) of bearing is 37.1 x 21 x 8mm - Steel bearings - Oversize bearing for non-drive side of SRAM BB90 road cranks & SRAM BB95 MTB cranks

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction

The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

Get back on the road with a quality replacement hanger. - Attachment hardware is sold separately - For specific compatibility concerns, please contact our Customer Service team Specifications: - Size: Rear drive side, 135mm Q/R - Mounting location: Rear drive side - Attachment: 2-bolt

Replacement levers for Trek kids' bikes. Genuine replacement parts Replace your worn or damaged brake levers for proper braking operation. - Sized for smaller hands - Two-finger lever operation

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with Bontrager Pro Blendr stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Madone KVF Aero Integrated Bar/Stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

Grip it and rip it The XR Trail Comp grip features a unique finned texture that conforms to your hand to keep you comfortable all day while you ride. Plus, a lightweight nylon CoreLock clamp holds the grip securely in place for confidence on even the most technical trails. - Finned pattern conforms to hand for supportive grip, control, and comfort - Tread and rubber compound optimized for control and comfort - Single-clamp design maximizes grip surface for secure, predictable performance - Nylon CoreLock clamp offers dual clamp strength - 3mm M4 bolt increases hold and resists stripping - 31mm diameter

Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.

Jagwire's Mountain Sport Disc Brake Pads (Formula) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Genuine replacement parts Get back on the bike with fresh brake pads for optimal operation and safety. Replacement brake pads for Zoom brakes used on specific Trek and Fisher mountain bikes. - Replacement disc brake pads for Zoom HL-280 calipers - HL-280 Zoom calipers came stock on Trek 3500 Disc, X-Caliber, and other models

Good things come in pairs. Put your foot down! Electra replacement pedals are perfect upgrades. This updated design connects you to your bike with an efficient and lightweight pedal. Product details: - Nylon body - 9/16" fits most bicycles with three-piece cranks - Weight: 380g

RockShox 32mm Seal Kit

- HG technology has chamfered inner plates to optimise shifting performance on HG sprockets - Durability is assured through the heat treatment of rollers, pins, and plates - Includes connecting link - Weight: 335 grams

- Steel cups - Steel retainer bearings - Available in chrome or black - S.H.I.S.: EC34/28.6-26tpi|EC34/30 - Steerer Dia: 28.6mm - Cup Dia: 34mm - Race Dia: 30mm - Stack Ht: 40mm Size: 1-1/8"

SRAM's PG-730 7-Speed Cassette is the perfect replacement for your worn-out gears. It features a rugged steel construction for awesome durability and SRAM's PowerGlide technology for smooth, precise shifts throughout its 12-32 tooth range.

• Square taper interface • Only includes left crank • 175mm length

Shimanno Deore XT RD-M786-SGS Rear Derailleur Outer Cage Plate - "B" fit for SLX RD-M675-SGS, Deore RD-M615-SGS - OEM outer cage plate for XT RD-M786-SGS

BB-UN26 cartridge bottom bracket. - Smooth rotation - Square taper spindle - Sealed cartridge bearing assembly